Creating a Disk-Based Movie Archive

Okay, I’ll admit it–I’m sorta lazy. I’d like to be able to put all of my DVD’s and Blu-ray movies into a jukebox, and then select the one I’d like to watch from the comfort of my couch. Well, that would be nice, but I don’t know of any way to add 300 DVD and Blu-ray players to my computer–nor would I want to. But, hey! My hard drive is more than large enough to store the content of my DVD and Blu-ray collection, if only there were a way to get them off the discs and onto the hard drive.

The Dirty Word – Decrypting

As I’ve pointed out in past articles (look out, here comes the obligatory disclaimer), it is illegal under the Digital Millenium Copyright Act of 1998 to decrypt copyrighted material that has been encrypted for copy-protection purposes.

The Spirit of the Law

That said, there are companies (Fusion Research, for instance) that sell media server hardware and software that have found legal loop holes in this legislation. Here’s what they do. They copy the entire disc to your hard drive, unmodified and fully encrypted. Then, they play or serve the image to your CSS-licensed display device, whether that be simply DVD player software, such as PowerDVD, or a remote extender device. Since the content has never been decrypted, except by CSS-licensed players, no one has broken the law–so they say. Regardless, some companies have been sued over this technique in recent years. However, as far as I know, they’ve won these lawsuites, so we can safely say that their assumptions are correct about the spirit of the DMCA.

But all of this is strictly irrelevant to us. We’re not playing with expensive video archiving and serving hardware. We simply want to play movies from Windows Media Player, without having to put the disc into a drive. Well, let’s see if we can do that, while maintaining the spirit of the Copyright Act, if not the DMCA. First consider why copyright holders don’t want you to unencrypt their content. I can think of several reasons:

  • They want to force you to watch their FBI and Interpol warning notices. Laugh if you will, but this is a really valid reason. They want you to be reminded each time you watch their material that they own a copyright on that material. Each time you’re reminded of this fact, it strengthens your inner resolve not to involve yourself in piracy.
  • They want to force you to watch their corporate logos. Again, this is not really a laughing matter to media developers. It’s marketing in the deepest sense of the word. These logos help them to establish themselves in consumer minds as important players in the media industry. Media developers spend billions of dollars on these compaigns, so think again if you think they don’t work.
  • They want to ensure that you’re only watching material targeted for the geographic region for which it was intended. If you live in the United States, for example, you can probably only watch a region 1 DVD in your DVD player. Content is released in different regions at different times because of the time required to prepare a release for a particular language or set of marketing requirements. To begin profit-taking as quickly as possible on a media venture, copyright holders will release content to a region as soon as it’s been fully mastered–usually beginning in the United States. But they don’t want Asian viewers (for instance) watching movies until they’re actually released in Asia, even if they’ve already been released in the US. The marketing campaigns for each region are different for demographic reasons. If US content were watched in Asia, then less sales of the Asian version of that content would occur when the Asian marketing campaign was finally ready, thus reducing the effectiveness of the Asian marketing campaigns.
  • They want it to be more trouble than it’s worth to skip the embedded trailers for other films by the same vendors. While you at least have the option of skipping the trailers, many people have trouble finding the right combination of buttons on the remote to skip directly to the disc menu, so they often just wade through the trailers when the disc is inserted.

Commercial content pirates use sophisticated machinery to make bit-for-bit copies of copyrighted materials. These duplication devices are unaffected by the self-contained copy-protection schemes that modern DVD and Blu-ray content use. Thus, it’s safe to say that content providers are not attempting to stop commercial pirates by using encryption techology–they simply can’t, so they fight these battles using police forces and court systems, instead. Thus, content encryption exists solely to keep the honest people honest. If being forced to watch the FBI and Interpol warnings is not sufficient impetus, then at the very least it will be somewhat more difficult for us to make copies to hand out to our friends and family.

It’s a sad, but true fact that most of the encryption efforts put into copyrighted media exist for marketing reasons, and not at all to control commercial piracy. Note also that I wasn’t mis-using the word “force” in each of these points. Have you ever tried to skip over the FBI warning with your DVD remote? You can’t do it. You usually get a little universal symbol in the upper right corner of the display that indicates the fast-forward function is not allowed at this time. Additionally, DVD’s are region encoded, and US players are designed to simply not play a DVD encoded for a different region. The rules for software players are a bit different, but it’s not off by much. The DVD or Blu-ray drive in your computer can have its region code reset at most 5 times before it locks onto the last setting.

I mention all of this for one reason: Because the techniques I’m about to give you are designed to defeat all of the reasons why content providers want your DVD’s to remain encrypted and intact. In past articles, I’ve used concepts like the US Copyright Act’s Fair Use clause to justify making backup copies of your own media. While we’re not talking about copying rented movies, or about making free copies of your movies for your friends and family, we are talking about defeating the copyright holders’ real purposes for copy protection. The only thing worth storing on your hard drive is the movie itself, so we’ll be stripping out the incidental garbage that you don’t really want to watch anyway, much less have it consume valuable hard drive space.

Getting Down to Business

There are two stages to the process of formatting video and audio content for streaming. The first is decryption, and the second is transformation. The decryption process is (quite ironically) the simplest of the two. This is mostly because the transformation process involves many more choices on your part.

Ripping DVD and Blu-ray Discs

Now, there are several free software programs available on the Internet which can mostly do what you need. Really, whether or not these programs can do the job depends on when the movie was released. With the advent of the DMCA legislation in 1998, new development on most of the free DVD decryption software was stopped after threatening letters were sent by copyright holders to the software developers. Between that, and the fact that the CSS algorithm is updated occasionally in an attempt to defeat such decryption software, it’s pretty safe to say that many movies released after about 2003 are difficult to decrypt with the remnants of the free software you might find floating around out there.

In the interest of completeness, I’ll name a few of these programs:

  • DeCSS
  • DVD Decrypter
  • DVD Shrink
  • Rip It 4 Me!
  • DVDFab (HD)
  • DVDPro
  • DVD Ripper
  • Magic DVD Ripper
  • Bingo DVD Ripper
  • Xilisoft DVD Ripper
  • ImToo DVD Ripper
  • DVD43

Note that I haven’t provided links to these. They change from time to time, and I won’t be accused of “facilitating” the propagation of these illegal programs, and thereby potentially losing my ability to use my WordPress account. Simply enter the names into your favorite search engine, and they’ll more than likely be the top links on your results pages.

Keep in mind that many of these titles are evaluation versions of for-profit programs. I’ve ordered the ones I know are truly free at the top of the list. The biggest concern I personally have with the for-sale programs is that I’ve found that you’re often buying more than you’ve bargained for. A large body of demographic market analysis has shown that people who download and purchase programs like this are likely candidates for commercial sales of other types of software and products. Thus, I’ve found that some of these programs come with ad banners, and even spyware built into them! You pay for them, and they use you.


I currently maintain that the only program worth purchasing (in my humble opinion) is AnyDVD HD developed and provided by a company based in the Carribean islands called SlySoft. If you can imagine a company devoted to what basically amounts to developing and selling illegal software, but which has nothing but the most altruistic motives, then SlySoft is your company. You won’t find any spyware or advertising banners, and you won’t have to wonder what else the software is doing to your system. The people at SlySoft basically disagree with the DMCA legislation, and have found a legal way to fight that battle–using what amounts to a form of civil disobedience–by moving to an area outside of US jurisdiction.

The standard DVD version of this program is about 40 US dollars. The HD version sells for about 100 dollars, and comes with the additional ability to decrypt Blu-ray and HD DVD discs. New releases are made available by SlySoft on a near monthly basis to keep abreast of the latest CSS encryption algorithm changes, and these updates are free to registered customers. A full uncrippled version of AnyDVD (HD) can be used for free for a three-week trial period. Thus, the following text assumes you are using AnyDVD (HD).

One interesting aspect of AnyDVD, which is not to be found in any other type of DVD and Blu-ray decryption software is that it runs as a service on your computer that sits in between the DVD/Blu-ray/HD DVD drive and the Operating System itself (Microsoft Windows, in this case). The value of this approach is that any software designed to play or manipulate DVD content sees a modified view of the disc. All discs appear to be unencrypted. Thus AnyDVD (HD) has the effect of enhancing all DVD manipulation software with decryption functionality.

And there are plenty of programs on the market for manipulating DVD content. Most of them assume you’re manipulating unencrypted content, because, well, it’s illegal to decrypt DVD content these days. If you’ve been duped into buying a program for manipulating DVD content, only to find that it doesn’t work with any of the DVDs in your movie drawer, then AnyDVD has a few surprises in store for you. Your software will now find all of your movies to be nicely unencrypted!

That cool feature aside, AnyDVD can also be used to copy your DVDs and Blu-ray discs to your hard drive. The reason you want to do this is because the transformation process is time consuming, and should be done in batches. Thus you’ll want to work with 8 or 10 disc images at once. To do this, you’ll need copies of the unencrypted content of several of your discs on your hard drive at once. Then you can go away for a few days while the transformation software’s batch processor does its job.

The lastest version of AnyDVD can create both file-based and ISO-image-based copies of your discs. After installing AnyDVD, simply right-click on the little red fox icon in your system tray, and choose “Rip Video DVD to Hard Disk…”. This will create a folder named after the disc title in your “My Documents” directory (configurable).

Don’t use the “Rip to Image…” feature. This is great for creating an ISO disc image file, which can then be used to burned a (unencrypted backup copy of a) DVD using readily available DVD burning software such as Roxio or Nero, but the ISO image can’t easily be manipulated by most DVD transformation software (although this would be a cool feature for most such packages).

In the following section, I’ll show you how to use transformation software to copy just the video and audio data files you actually need. This saves you a (small) bit of time in the data copy phase, but significantly increases the transformation setup time for a batch of movies.

Converting Content to a Streamable Format

The transformation process is the process of converting the MPEG-2 DVD video and Dolby or DTS Digital multi-channel audio data files in the DVD data directory into a single streaming media file that you can easily play on your Windows Media Center PC. This requires software, and while there is no doubt a number of excellent free software packages available, the best transformation software, hands down, is found in for-purchase products.

Since there’s nothing illegal about such programs, you’ll find plenty of them on the Internet. The one I use, and have found to be the most effective for my purposes is called TMPGEnc 4.0 XPress by Pegasys, Inc. However, TMPGEnc is by no means the only option, and you may find something else that is more to your liking. Because I’m used to TMPGEnc, and because it’s a fairly popular program, I’ll illustrate the video transformation process with it.

TMPGEnc is comprised of two separate programs, the encoder program, and the batch processor. The encoder program is what you use to configure a transformation. Transformations are then registered with the batch encoder, which performs the transformation process in the background. The encoder program may also be used to directly execute a transformation, but you may not use the encoder program to configure a transformation while it’s busy executing another transformation, so the batch encoder is the tool of choice for execution.

Start the encoder program. Were it not for the myriad options available in the various stages of configuring a transformation, you could almost guess the process because TMPGEnc presents it as a step-wise set of tabs on the main window. The four tabs across the top are labeled, “Start”, “Source”, “Format”, and “Encode”.

The Start page allows you to choose the type of project to begin. Essentially, these choices amount to either starting a new project, or opening an existing, previously saved project. Click on “Start a new project” and you’ll be moved to the “Source” page. Here you can decide whether you wish to add audio and video files directly, or use the source wizard to help you select a set of files. Click on “Source wizard”, and a dialog opens with three options, “File”, “DVD Video, DVD-VR or DVD-RAM”, or “Microsoft Windows XP Media Center Edition video recorder file”. Choose the center option, “DVD Video”, and click “Next…”. Select the directory containing DVD data files you’ve previously imported using AnyDVD.

After a few seconds, another dialog opens which contains a list of titles found in that directory. These titles correspond directly to various elements of the DVD disc contents, including FBI warnings, trailers, special features, and the movie itself. Locate the longest title by time–usually between one and three hours in length and check the box next to that Title. Select the drop-down within that title box and ensure that the correct audio stream is selected (eg., “Dolby Digital, 48000Hz, 5.1/6ch, English”). The second drop-down box allows you to select sub-titles, but if you enable subtitles then you should understand that these will be embedded in your final video output–you won’t be able to turn them off as you can with a normal DVD movie.

Once you’ve selected and configured the track you want, then click the “Next…” button. At this point, you are presented with the option of importing chapter entry points into the key-frame list. Key frames are complete picture frames in the frame list that make up the movie. MPEG encoding is a form of delta encoding, which means that most of the frames in the video stream are made up simply of sets of changes from the previous frame. Every few frames, a key frame is embedded in the stream, but for the most part, each frame is simply a composite of all previous frames, plus delta data in the current frame. By adding chapter entry points as key frames, you have the ability to fast-forward, if you will, to these key frame points while watching the movie.

Make sure the “Copy selected titles to the hard drive” is unchecked, as the data is already on the hard drive. Back a few paragraphs, I mentioned that you could use TMPGEnc to copy just the data you needed, rather than the entire movie. This is where you would do that. If you wish, rather than copy an entire DVD using AnyDVD, simply insert the DVD into your drive, and select the drive from within TMPGEnc, it will take a bit longer to generate a title list–30 seconds perhaps. When you reach this screen, make sure the “Copy…” option is selected, and TMPGEnc will copy the desired track (unencrypted via AnyDVD) directly from the DVD. For now, uncheck this option and click “OK”.

You’re now presented with another tabbed dialog. The three tabs are, “Clip properties”, “Cut-edit” and “Filters”. Up to now, you might have guessed what to do, but from this point on, the process becomes more complex. Begin on the “Clip properties” page. For the most part, the only thing you need to do here is name the clip. I name the clip after the movie I’m encoding.

Make a mental note of the aspect ratio displayed a few lines down. It will probably say something like “Pixel 40:33 (NTSC 16:9)”, or “Pixel 10:11 (NTSC 4:3)”. Skip the “Cut-edit” page, and move right to the “Filters” page by clicking on the “Filters” tab at the top. This screen shows a list of filters to be applied to the video stream down the left side. The default list contains about 8 different filters, most of which are disabled. The “Deinterlace” filter is always enabled, and there’s no way to disable it. The “Picture resize” filter is also always enabled.

If it’s not already highlighted, click on the “Deinterlace” filter, and then look at the bottom third of the window. By default, the “Deinterlace when necessary” option is selected in the top (Deinterlace mode) drop-down box. Change this option to “Deinterlace always”.

Enable the “Picture crop” filter, by checking the check box on the left side of the “Picture crop” filter icon. Ensure it’s selected so that its options are displayed in the filter options pane in the bottom third of the dialog. Likely as not, the video window in the top two-thirds of the dialog is completely black. This is because most video data streams from movies fade in from black, and by default, TMPGEnc’s filter window starts you off viewing at the very first frame. Grab the slider under the blue information pane and drag it an inch or so to the right.

If you’ve selected a 16:9 wide-screen movie to experiment with, then you are probably looking at a frame in the movie with black bars on the top and bottom. We need to get rid of these bars. We could encode the film with the black bars, but it’s just a waste of disk space to do so, and entirely unnecessary. Increase the value in the “Top” field in the filter options pane by clicking the little “up-arrow” on the right of the “Top” value edit box. As you do so, you’ll see the video frame increase in breadth, and the black bar decrease at the top. Increase the “Top” value until all of the black is gone. Do the same for the “Bottom” value.

If you’re encoding a standard “Anamorphic” wide-screen DVD, you should find that after cropping off the black bars from the top and bottom, the “Size after cropping” field will display about 720 x 360. Now, 720 is twice 360, so you might think your visible frame should be about twice as wide as it is tall. A quick check with a ruler will show you that it’s more nearly 2.5 times as wide as tall. Well, that doesn’t make sense, does it? And in fact, a glance at the back of the DVD case will probably indicate that the film is formatted to preserve the original theater presentation aspect. Well, if you’ve done any thinking about this before, you are probably aware that original theater presentation format is more like 2.35:1 or even more. Click on the “Clip properties” tab for a second, and note again the “Aspect ratio” field under “Clip Settings”. Anamorphic wide screen means that the pixel width to height ratio is not 1:1 either, but in this case, 40:33. To find the true width to height ratio, you also have to take the pixel ratio into account.

Back on the “Filters” screen, you may now press “OK”, to accept your “Picture crop” and “Deinterlace” filter settings. The Clip dialog is dismissed, and you’re returned to the main window, where you can now select the “Format” button to move to the encoding options. You’re now presented with a dialog containing a tree-view on the left side. This tree-view shows a hierarchy of encoding formats. These are the output formats that you will be selecting from.

For Windows Media Center with an Extender, you need to have the most Windows compatibility possible. I encode my movies using Windows Media Video and Windows Media Audio formats. Under “Output templates for specific format” you’ll find the third entry (in 4.0) to be “Windows Media Video file output”. Clicking this option will display information about the option on the right side of the dialog. Now click on “Select” at the bottom.

You now see a window similar to the Filter window we looked at earlier, except this is the codec configuration dialog, allowing you to configure the output format options. Within the “Video” tab, select “Windows Media Video 9 Advanced Profile”, set the “Size” to “Pixel 40:33 (NTSC wide)” (actually, set this to the value matching the clip you’re encoding). Choose “30 fps (progressive)” under “Framerate”, and set “Video encode type” to “2 pass VBR (average bitrate)”. These settings work well for me.

Now, set the “Average bitrate” to at least “1500 kb/s”. Larger values will increase quality only a little, but will increase the file size quite a bit. Ensure that the “Maximum key frame interval” is set to at least “8000 ms”. Smaller values here will embed more full (key) frames, giving you slightly better quality at the expense of more hard disk space. I set my “Video quality” field to about 95 percent. This slider actually move between still and motion video quality. Technically, you should increase this value for movies with more dynamic motion, and decrease it for movies with less dynamic motion.

Moving on to the “Audio” tab, select “Windows Media Audio 10 Professional” for the “Audio codec”, and then select “2 pass VBR (average bitrate)” for “Audio encoding type”. Under “Audio format”, select either the 2 or 5.1 channel, “256 kbps, 48 kHz, 24 bit VBR” option. MP3 files downloaded from iTunes come in at 128 kb/s. iTunes plus songs are are DRM-free and come in at 256 kb/s. Many people would tell you that both of these quality levels are too low. These people generally purchase music CD’s and rip them to 320 kb/s or higher. Audio CD’s use an uncompressed format called PCM, but audiophiles will tell you that even PCM quality is bad compared to analog (high-quality reel-to-reel, or the lesser, but more readily available vinyl album format). Ideally, PCM (uncompressed) digital is the best digital option we have available, but even DVD audio is compressed to some degree. PCM audio is available on Blu-ray as a new format called HD Audio (more on this later).

Maybe my hearing is gone at 44 years old, but I find 256 kb/s to be a reasonable compromise between quality and disk space. There’s an article on quality differences between various sampling rates of AAC and MP3 at Planet of Sound, if you’re interested.

You may, of course, play with all of these video and audio settings to find a quality-to-size ratio that suits your tastes. I like high quality, so these fairly high quality settings are more to my liking. They will generate a 1 to 1.5 GB video file from the original 4-5 GB of DVD data. I’m happy with this size, as it allows me to store about 700 movies on my 1 TB drive.

Finally, the “Other” tab has fields for adding certain meta-data values to the output file, include “Title”, “Artist”, “Copyright” and “Comment”. I set the title here using the exact text I wish to have displayed under the movie icon in the Media Center video display panel, because Windows Media Center uses this field as the video name.

When you’re finished, then move on to the “Encode” window. Ensure the “Output file name” field contains the correct path and file name for your output file. Now, at the bottom of this window, you’ll find three iconic buttons, an arrow pointing to a film strip, a stylized clock, and a magifying glass over a film strip. These buttons represent “Encode”, “Send to batch encoder” and “Preview output”, respectively. Choose the center button–the one with the clock. This will add the job to the TMPGEnc batch encoder. The batch encoder window will open and your job will be added to the list.

While your job has been added to the batch encoder, it’s still present in the TMPGEnc program as well. You may click on the right button–the preview button–to see a preview of the output. Depending on the speed and power of your CPU, the amount of memory you have, and the encoding options you chose, you may find this preview output to be a bit choppy. The reason for this is that the movie is being filtered and encoded on the fly from the original DVD video and audio input.

At this point, you may click the “Start” button in TMPGEnc, and begin the process again with another movie. There are various places in the process where you can save your settings. You may then apply these saved settings to the next film, saving yourself the effort of having to remember how each setting was selected. I recommend you use these options.

Getting it Done Faster

If you have a multi-core CPU, you can tell the batch encoder to use multiple cores to encode multiple streams simultaneously. Select the “Options” tab in the batch encoder window, and choose “Preferences” from the menu. At the top of the “Preferences” dialog, you’ll find an option for setting the “Task count”. The range of this value is between 1 and the number of CPU’s or CPU cores you have available. I recommend using at least 1 less than the maximum, because the transcoding process is very CPU intensive. If you aren’t using your HTPC for anything else, then go ahead and set it to the maximum, but don’t say I didn’t warn you. You won’t be able to do anything else while the batch encoder has control.

Once you have streaming video available to play, just configure Windows Media Center to display video content from the directory in which you stored your output files.

High Definition Content

Encoding HD content involves a similar process in TMPGEnc to that of encoding DVD content, but there are some differences that I’d like to point out.

First of all, the Blu-ray disc format is fairly new, and hasn’t been “hacked” as much as the DVD format. Additionally, it’s quite an outlay of cash–between 5,000 and 10,000 dollars–for a company to purchase the Blu-ray specifications, and certain licenses must be adhered to, making it difficult to generate programs that manipulate commercial Blu-ray content.

One important hindrance is that two separate specifications were originally developed for Blu-ray content; the BDMV format for commercial content, and the HDMV format for home and amateur video enthusiasts. Clearly, the intent here was that readily available software for manipulating Blu-ray content would operate and generate discs using the HDMV format, which means they would not coincidentally work with the slightly different BDMV format. This difference in formats would have the effect of reducing the number of legitimate programs on the market that would just happen to work with commercial Blu-ray discs–as long as they were unencrypted.

As it turns out, an oversight in the Blu-ray specification may have saved us on this point. The spec says that HDMV format support is optional in Blu-ray players, and a significant share of the players on the market today have taken advantage of this fact, and left out support for HDMV. Thus, Blu-ray software developers can claim that they’re developing BDMV creation software because HDMV support is not pervasive in players.

Regardless, it will be a while before there are many programs on the market for manipulating commercial Blu-ray disc content. TMPGEnc doesn’t currently provide a Blu-ray import wizard, so the process of adding an HD content clip to the “Sources” window is a bit more manual.

Additionally, TMPGEnc doesn’t discriminate much when it comes to multi-stream input files. My first attempts at using a Blu-ray .m2ts file as an input file had me watching HD content in Spanish on my XBox 360 Media Center extender. I had no option for selecting the English sound track, and the Spanish track was somewhat randomly selected by TMPGEnc from the list of audio streams available in the .m2ts stream file.

To overcome this problem, I had to download a freeware program called “tsremux”, which accepts a .m2ts input file, allows you to select the individual streams in the file, and generates an output file containing only the streams you want. How do you know which streams you want? Well, that’s a bit more difficult. I downloaded yet another freeware program called “BDEdit”, which decodes and displays the internal format of the Blu-ray .m2ts files found in a Blu-ray “STREAMS” directory. By looking carefully at the contents of each stream (hint: look at the largest one first), I was able to determine which of the numbered streams contained the content I wanted. Then, moving into tsremux, I opened the correct .mt2s file, and selected the same numbered streams. The tsremux program also has options to convert a Blu-ray HD audio stream to a DTS Digital stream. While it would be nice to maintain the HD audio format, TMPGEnc doesn’t yet understand this format, so you have to downgrade it a bit, or you’ll end up with a silent film.

Once you’ve “remuxed” your .m2ts file, you can simply use the “Add file” option in the “Source” tab of TMPGEnc to add the remuxed version of the .m2ts file. It becomes one of your clips, to which you can apply filters and codecs just like DVD content.

Other HD-specific issues you should be aware of are that HD content generally uses a 1:1 pixel aspect ratio, and this ratio should be carried through the entire transformation configuration process in TMPGEnc.

HD content is 1920 x 1080, but the content is encoded on the disk at 1920 x 1200, so you’ll want to crop off the black bars again. Ensure that you generate 1920 x 1080 output files, so you get the highest resolution possible on your Media Center display, or XBox 360 extender display. For HD content, you’ll find that a direct connection between the video card and the projector or TV offers the best picture quality, rivaling that of Blu-ray itself.

You’ll have to do a few Google searches to location the tsremux and BDEdit programs. These are more or less contra-band, and are thus a bit difficult to come by. Let’s just say I’ll leave the location of these utilities as an exercise to the reader.


The process I’ve shown you includes my own personal preferences. I recommend you play with your transformation package of choice. Get to know what the features mean, and try out different options to see what their effects are. Give it some time–it’s a lot to take in at once.

In the spirit of doing what’s right, let me remind you again that we rip, store and play only content that we’ve purchased for our own personal use. Anything else is illegal according to the spirit of the law, and frankly, unethical in both the judicial and capitalistic senses of the word! So have fun, but do what’s right!


4 comments on “Creating a Disk-Based Movie Archive

  1. […] For complete instructions on how to create a playable archive of your purchased movie content, see my previous article, entitled, “Creating a Disk-Based Movie Archive”. […]

  2. Ev says:

    Does the ripped version still contain DTS/surround sound? I must admit that is one thing that makes me hesitate to liberate myself from DVDs is worry over sound quality. Simple stereo sound would be a step backwards.

    I must admit, I found your bullet points in “The Spirit of the Law” section interesting. I’ve lately been feeling a sense of annoyance with these mandatory cruft you can’t skip over. Some of our DVDs here in Australia even have a condescending anti-piracy ad which is annoying enough, but on one DVD I have you can’t skip over this at all! It infuriates me every time.

    I am being penalized for using the product legitimately!

    • John Calcote says:

      @Ev: The ripped version contains *exactly* what’s on the DVD – including all sound and video tracks with no degradation in quality at all. The trouble isn’t with quality of ripped material. The trouble is with storage – you really don’t want to consume 4.7 GB of hard disk space per movie. Ideally, you’d be able to keep most of the quality of a standard DVD by storing at < 1GB per movie.

      Standard DVDs are encoded on disk in MPEG2 format – 720 x 480 non-interlaced resolution (480p) – so the video is already fairly compressed, and the audio is also often compressed using PCM compression, although generally not as much as the video. Regardless all 7.1/5.1/2.0 tracks are still in place both on disk and in the ripped image.

      Blu-ray movies are often stored in an uncompressed AVCHD/H.264 container/compression format. The sound tracks are rarely compressed on Blu-ray disks, usually stored in TruHD or some other newer uncompressed container format. Sound seems to be what people are mostly concerned about with regard to encoded audio/video streams – and with good reason. Good sound can have more of an impact on your movie-watching experience than good video (interestingly). Raw storage for a Blu-ray disk is between 25 and 50 GB per movie. You really don't want to use that much of your hard disk storage per movie.

      I do know a few purists who care enough about quality to store unencoded DVD images, but I don't know too many who store unencoded Blu-rays. HD space is just too expensive yet. One problem with encoding is finding a format that works with your playback devices. Playing back on the computer isn't usually a problem, but streaming to a media center in your home often leaves few choices in formats. Some devices (XBOX 360) will only play multi-channel audio when it's encoded in Windows Media Audio (WMA) format (no surprise there).

      Playstation 3 does better with various formats. Even though I have an XBOX, I'd recommend a PS3 to anyone considering a media center device today. Microsoft's Windows Media Center division is so torn by differing internal market pressures that they're rapidly losing their market share in the media center device space. I recently bought a new Sony Blu-ray player that can stream media from my 4 TB Western Digital Network-Attached Storage (NAS) device. Unfortunately, it doesn't work with the format I chose to encode my movies in. I have yet to research it to find out what formats it will accept.

      • Ev says:

        Thanks for the follow-up. I am really enthused on the idea of buying a 1-4TB NAS and doing this, now.

        I’ll just have to figure out an appropriate toolchain on Linux to do the deed.

        I also recently got a Sony Blu-ray that talks DLNA, but I’ll probably use XBMC for its nicer interface (particularly if I figure out how to jailbreak my Apple TV2).

        The only drawback of using a PS3 as a dedicated media centre is competing with the kids to use it. 🙂

Comments are closed.